The 1-Group Semi-Automatic Appia (MAPPIA5SEM01) is an elite home espresso machine with a professional heritage and professional quality parts from Nuova Simonelli. The Appia has been designed as the espresso machine top baristas would use at their homes and features such professional touches as a five liter heat-exchange, copper boiler that allows you to steam and brew at the same time and Nuova Simonelli’s patented “push/pull” steaming levers that are more intuitive and ergonomic than traditional steaming knobs. This semi-automatic Appia gives the user unparalleled control while pulling shots and features the Soft Infusion System® which delays full water pressure to allow the coffee cake to be more fully saturated preventing cracking and channeling in the coffee cake during extraction. Additionally, unlike many other top of the line home espresso machines, the 1-Group Appia comes wired for 110 volts which means you can plug it into any regular wall outlet in your home.
 
Features:

• Stainless steel steam wand and hot water nozzle
• Push/pull steam levers
• Stainless steel work tray
• Compact, space-saving dimensions
• Passively heated demitasse tray
• 5-liter copper boiler with pressostat and anti-vacuum valve

Benefits:

• Raised group head can accommodate glasses up to 24 ounces
• Soft Infusion System® reduces channeling and cracking of the coffee cake during extraction
• Group head constructed with thermo-compensated brass for superior durability and heat retention
• Semi-Automatic dosing controls allow the user and not the machine to decide how long it takes to pull a shot

Additional Considerations:

A friendly and knowledgeable Sales Specialist from Food Service Warehouse will contact each customer who purchases a Nuova Simonelli espresso machine to discuss customization options, warranty considerations and the delivery and installation procedures.

Please be Advised:

Every Nuova Simonelli espresso machine is shipped to a Nuova Simonelli certified service technician and comes with required professional installation already included in the price. A service technician will contact you to arrange an installation appointment at your convenience. However, certain pre-installation requirements, listed below, must be met prior to the scheduled date for installation. Failure to meet these requirements will result in added fees and delays in installation.

Pre-Installation Requirements:
 
Counter Space and Capacity Requirements
            Height: 22”
            Depth: 25”
            Width: 19”
            Capacity: 130 lbs.
 
Drain Requirements
            Open gravity drain of minimum 1.25 inch I.D., within 4 feet of the machine
            Refer to specifications sheet for diagram showing countertop drain-hole location
            Drain-Hole diameter: 2½”
 
Power Requirements
            Volts: 110 (voltage range of 110-125)
            Watts: 1500
            Amp Draw: 13
            Receptacle: NEMA 5-15
 
Water Quality Requirements
            Water Hardness less than 3gpg or 50ppm
            If Water Hardness exceeds these limits, an approved water softener must be installed
            Refer to specifications sheet for approved water softener capacities
 
Water Line and Pressure Requirements
            3/8” dedicated cold water line with shut-off valve and compression fitting
            Flow rate greater than 35 GPH
            Line pressure less than 70 PSI or 5 BAR