Toll Free 1-877-877-5655
Se habla español 877-877-5491

Jackson (Model 10APRB) - 45 Rack/Hr Door Type Dishwasher

Item shown is model 10A. Item shown is model 10A.


Ship Weight 200 lbs.
Amps 43.4
Booster Heater Included Yes
Booster Tank Capacity 3 gal.
Dimensions (H x W x D) 58.25" x 35.5" x 24.25"
Dishwasher Type Door-Type
Hz. 60
Incoming Water Temperature 140°F
Interior Clearance 17.25"
Phase 1
Rack Included Yes
Racks per Hour 45
Rinse Horsepower 1/2
Rinse Tank Usage 6.5 kW
Rinse Temperature High-Temp
Tank Capacity 4.5 gal.
Tank Usage 6.5 kW
Voltage 208
Wash Cycle 72 seconds
Wash Horsepower 1/2
Wash Tank Usage .75 kW
Water Used 1.16 gal/rack

Manufacturer Spec Sheet

Engineering specifications show exact measurements, power requirements and product options. Download Now

Product Details

The old saying, “If it ain’t broke, don’t fix it,” could easily be applied to Jackson’s Model 10 Series of door-type dishwashers, as this line has been produced for more than 80 years. Their Model 10APRB 45 Rack/Hr High-Temp Door-Type Dishwasher features an exclusive counter-rotating wash arm design to provide superior wash action. A couple important features that have been added to this model are a built-in 6.5 kW booster heater that employs a 40°F rise to sanitize dishes without the use of chemical sanitizer and a 1/2-horsepower pump that ensures proper flow pressure during the rinse cycle. This door-type dishwasher is specifically designed for establishments with low or fluctuating water pressure and is particularly ideal for facilities using well-water systems. Other standard features include an external vacuum breaker, electric wash tank heat with low-water protections and an incoming pressure regulator. It is capable of producing 45 racks of sparkling dishes per hour while using just 1.29 gallons of water per rack.


  • Fully automatic wash cycle
  • Stainless steel construction
  • Automatic or manual activation
  • Pressure regulator on incoming water line
  • Side mounted control box with deliming switch
  • Built in booster heater set for 40°F to 50°F rise


  • Recommended for facilities where water flow is below 15 psi
  • Round design distributes even wash action for superior results
  • Must be connected to potable water source that can provide minimum of 140°F water for wash stage

Additional Considerations

  • This unit is available in a variety of voltage and phase configurations. For more information on these and other available options, call an Account Manager at 1-877-877-4379.
The item you are viewing is Out of Stock

Become an FSW Insider

Contact Information


Information & Inspiration for the pro


Information & Inspiration for the home cook