Frymaster (GF14-SD) - 40 Lb Economy Gas Fryer
Manufacturer Spec Sheet
Engineering specifications show exact measurements, power requirements and product options.
Download Now Specifications
Dimensions (H x W x D)
40.51" x 15.88" x 28.11"
Fry Area (W x D)
12" x 15"
Fry Pot Design
Standard Open Pot
Heating Element Type
Open-Pot
Oil Capacity
30 lbs. - 40 lbs.
Product Details
Features
- Stainless steel pot, door and cabinet
- Open-pot design, no tubes, easy to clean
- Deep cold zone, 1-1/4" (32 mm) IPS ball-type drain valve
- The large cold zone catches crumbs and sediment from the frying area
- The GF14 uses a millivolt temperature control circuit
Benefits
- Master jet burners have no burner tube radiants to burn out
- No burner cleaning or air shutter adjustment is required
- The open frypot has a large heat transfer area to fry more product per load and has no hard-to-clean tubes
- Every inch of the frypot and cold zone can be cleaned and wiped down by hand
Additional Considerations
- 1/2" NPT gas inlet
- Check plumbing codes for proper supply line sizing
- Allow 6" of clearance between the sides and rear of fryer
- Allow 24" inches in front for servicing and operation
- A minimum of 18" clearance should be maintained between the flue outlet and the lower edge of the exhaust hood filter
Real Questions. Real Answers.
Customer Email 9/27/2009
Q: What is the basekt size for this fryer?
A: This Frymaster 40 lb Economy Gas Fryer (GF14-SD) holds two baskets that are 5 ½” high by 6” wide and 12 5/8” long (front to back).
Delivery Details
Need Help? Contact Us!
1-877-877-4379 Mon-Fri, 6:30am-6pm MST