Code Green: Reconciling Green Cleaning with the Food Code
The FDA food code requires that restaurants sanitize any surfaces that might come into contact with food. Although many green cleaners have sanitizing properties, the EPA and the FDA food code define "sanitization" of food-contact surfaces as a 99.999% reduction of disease-causing microorganisms within 30 seconds. Unfortunately, most green cleaners do not kill 99.999% of microbes, making it difficult for a restaurant to be "green" and still follow the codes.
Today, sanitizing solutions used on food contact surfaces are regulated by the EPA. However, any chemical sanitizer used on food-contact surfaces must also be approved as an indirect food additive by the FDA. This is because the sanitizer will likely make its way into the final food product.
The FDA has approved more than 45 sanitizing solutions for use on food-contact surfaces. You can add other components that are "generally considered safe" to these solutions. None of the approved solutions are completely eco-friendly, but some of them do less harm to the environment than others. While every state has adopted or is in the process of adopting the federal food code, some local governments have applied even stricter rules to the code, so it is always necessary to learn about local codes before choosing a sanitizer.
The most common chemical sanitizing solutions are the following:
- Chlorine solutions
- Iodine solutions
- Quaternary ammonia solutions
Chlorine solutions are without a doubt the fastest and cheapest of all the approved sanitizers. However, they are also among the most toxic, corrosive and dangerous of the solutions. Ammonia solutions are generally better than chlorine for the environment, but they are incompatible with many chemicals and other cleaners.
Choose an iodine solution. Among the three most common solutions, iodine is by far the most environmentally friendly. Like the other sanitizers, iodine is toxic in high concentrations and can vaporize into the air. However, iodine occurs naturally around the world, and the amount of iodine humans put into the air is nothing compared to the quantities of iodine that vaporize off the surface of the ocean.
Try an alternative solution. Unfortunately, iodine is highly expensive compared to chlorine. There are some cheaper environmentally preferable solutions that have been approved by the FDA for food-contact surfaces. You could try hydrogen peroxide, peroxyacetic acid, fatty acid and citric acid solutions.
Use hot water. When possible, you can sanitize utensils or equipment with hot water immersion. This is exactly what a high-temp dishwasher does. To truly sanitize, the FDA food code requires that the water be at least 171º F and that the immersion last at least 30 seconds. Obviously, some surfaces are too large for immersion, in which case a chemical sanitization is necessary.
The federal and local food codes contain more detailed information on the approved solutions and their levels of dilution.
Most food codes require that commercial kitchens sanitize food-contact equipment and utensils under the following conditions:
- Before each initial use.
- Between uses when there is a change from raw foods to ready-to-eat foods.
- Between uses when preparing different raw animal foods, unless these foods require progressively hotter cooking temperatures and you work with them in that order.
- Between uses when working with any potentially hazardous foods.
- Any time contamination occurs or is suspected.
Check your local food code for more details on when sanitization is required.
Most food codes require the following procedure for chemical sanitization:
- Clean the surface by rinsing and then washing with a detergent.
- Rinse the surface with clean water.
- Spray or wipe the approved sanitizer onto the food-contact surface until the surface is glistening. Let the sanitizer sit for the approved time period.
- Allow the surface to air dry.
The FDA food code and the information given here only offer guidelines for safe cleaning. You must always check your local codes to determine the exact rules for food service establishments in your area.
More from Code Green: Reconciling Green Cleaning with the Food Code ...
- Why Go Green in the Commercial Kitchen?
- Going Green in Your Commercial Kitchen: First Steps
- Investing in Green Equipment for Your Commercial Kitchen
- Greenwashing: Not All Things Green are Gold
- Training Your Commercial Kitchen Staff to Go Green
- Green Glossary
- Seals and Certifications in the Commercial Kitchen
- Top 10 Energy-Saving Tips for the Commercial Kitchen
- Energy Assessments for the Commercial Kitchen
- Energy-Efficient Hoods in the Commercial Kitchen
Back to Code Green: Reconciling Green Cleaning with the Food Code